Distribution

How to send a press release: who to send it to, when and how

Four ways to send a press release, and how to do the free one well: who to email, what to put in the email, when to send it and how to follow up, with what seven newsrooms' own pages ask for.

From $149 · Writing included · Approval before publishing

Press Moose Team13 Nov 202624 min read
  • how to send a press release
  • media pitching
  • newsrooms
Illustration of a man at a desk holding a gold press release beside an open envelope and a laptop showing an email

There are four ways to send a press release: email it yourself to journalists and newsrooms, post it on a free submission site, pay a wire or distribution service, or have a service write and publish it. Two of the four ways cost nothing, and emailing it yourself, to the journalists and newsrooms that cover the subject, is the one that puts the news in front of a journalist. In Cision's 2026 survey of 1,899 journalists, 97% prefer to be pitched by email and 82% reject a pitch that does not fit what they cover. Muck Rack's 2026 survey, as summarized by the University of Minnesota, found that 69% prefer pitches under 200 words and 78% prefer them before noon. A check by Press Moose followed four paid releases and found 100 copies of them on other sites.

The page shows how, step by step: who to send the release to, what to put in the email, when to send it and how to follow up, along with what newsrooms' own submission pages ask for and what the free and paid routes do instead. Seven newsrooms' own submission pages, read on November 13, 2026, ask for much the same things and disagree on one: whether to paste the release into the email or attach it.

The four ways to send a press release

The four ways differ in who does the work, what it costs and what comes back: emailing it yourself, posting it on a free submission site, paying a wire or distribution service, or having a service write and publish it.

Illustration of a woman holding a gold sheet of paper above an envelope, a tablet, a newspaper and a clipboard

The first way is to email it yourself. The sender writes the release, then emails it, or a short note with the release pasted below it, to the journalists and newsrooms they chose. A newsroom is the staff of reporters and editors who produce a news outlet. There is no fee and no middleman. The journalist decides whether anything is published at all.

The second way is a free submission site. The sender pastes the release into a site that posts it on its own pages at no charge. What comes back is a page on that site.

The third way is a paid wire or distribution service. The sender uploads the finished release and pays. The service usually checks it, publishes it on its own site and on partner news sites, sends it into the feeds that newsrooms and databases read, and returns a report. A wire, short for newswire, is a service built to move releases into those feeds.

The fourth way is a service that writes the release and publishes it. The sender fills in a brief instead of writing anything. The service writes the release, the sender approves it, and the service publishes it.

These four are different jobs, not rivals. An email asks one journalist to write a story. A paid service puts the release itself on news sites, as written. A sender can do both with the same release.

Two words on this page are worth keeping apart. Coverage is a story a journalist chose to write. A placement, sometimes called a copy, is the release itself, posted as written. The free site and the paid routes produce placements. The email route asks for coverage, and the journalist decides what happens next.

This table puts the four ways side by side; its prices come from each vendor's own page or guide, read on November 12, 2026, and from Press Moose's own pricing.

Way to send itWho sends itWhat it costsWhat comes back
Email it yourselfYou, to journalists and newsrooms you choseNothingA reply, a story, or no answer: the journalist decides
Free submission siteThe site, on its own pagesNothingA page on that site
Paid wire or distribution serviceThe service, to its own site, partner news sites and newsroom feeds$149 at EIN Presswire, from $475 at Business Wire, $1,145 for a national release of 400 words in PR Newswire's 2026 Pricing Guide, before its annual plan feeA report of the pages that posted the release
A service that writes and publishes itThe service, after you approve its draft$149, $299 or $649 at Press MooseA report of the pages that published the release

How to send a press release by email

To send a press release by email, pick the few journalists or newsrooms that cover the subject, write a short email to each with the release pasted below it, send it in the morning, and follow up once.

A pitch is the short email that offers a journalist a story; the press release is usually pasted below it or summed up in it. Journalists use the word for the note itself, and this page does too.

Email is the channel journalists say they want. Cision's 2026 State of the Media report puts the figure at 97%: "When it comes to reaching out with a pitch, the overwhelming majority of journalists (97%) prefer email." Messaging apps and social media direct messages came a distant second, at 14%. The survey ran in January and February 2026 and collected responses from 1,899 respondents in 19 markets, drawn from Cision's own media database. Cision owns the newswire PR Newswire and sells PR software.

The surveys on this page ask journalists about pitches and releases from PR people in general. None of them asks about a business owner emailing a local newsroom. The figures show what journalists say they want across the pitches they already receive; the newsroom pages later in this article show what individual newsrooms ask for in writing.

Who to send a press release to

A press release goes to the journalists and newsrooms whose readers the news affects, and to nobody else.

Illustration of a man choosing one gold card from six contact cards pinned to a board

Relevance decides whether the email is read at all. In Cision's 2026 survey, 82% of journalists said they reject a pitch that is not relevant to their audience or coverage area. 53% reject one that is too promotional or sales-focused. Respondents could pick several reasons.

Cision's news release about the same survey, dated May 13, 2026, adds that 72% of journalists say fewer than a quarter of the pitches they receive are relevant.

Muck Rack's 2026 State of Journalism survey points the same way. As summarized by the University of Minnesota's marketing communications office on April 13, 2026, 43% of journalists said it was rare to get pitches relevant to their beats. A beat is the subject a journalist covers: city hall, schools, restaurants, small business. The survey's sample comes from Muck Rack's own summary on the Institute for Public Relations' site, posted April 29, 2026: a global survey of 1,044 journalists, run from January 3 to March 2, 2026. Muck Rack sells PR software.

What the figures add up to: most pitches miss the journalist's subject, journalists say they reject the ones that miss, and a pitch that fits is the exception in the inbox rather than the rule.

A newsroom's own page can spell out what missing looks like. The Rio Grande Valley Business Journal in Texas lists what it does not publish: overt advertisements or marketing pitches, content lacking local or business relevance, and incomplete submissions without contact information.

The pile the email lands in is large. In Cision's 2026 survey, the majority of journalists are sorting through more than 50 pitches per week. A first-time sender's email arrives in the middle of that flow, and journalists say what decides whether a pitch is rejected is its fit with the journalist's audience or coverage area.

The pile has an encouraging side. In Muck Rack's 2026 survey, 86% of journalists say at least some of their work began with a PR pitch.

Finding the right person starts with the outlet itself. Many newsrooms publish a contact or submissions page that says where news goes: the Portland Press Herald in Maine, the Vail Daily in Colorado and the Spokane Journal of Business in Washington each publish one. The Portland Press Herald adds that its reporters' contact information is in the staff directories on its site. If the page names a person, write to that person. If it does not, read the bylines on recent stories about the subject: a byline is the reporter's name on a story, and the reporter who covered a similar opening, event or announcement last month is the most likely reader this month. Local news goes to the local newsroom's news desk, the newsroom's shared inbox or team for incoming news, not to a national outlet.

Journalists say they prefer emails written to them one by one. In Muck Rack's 2026 survey, 62% of journalists prefer to be pitched in an email written to one journalist, what the survey calls a 1:1 email. Tim Johns, a radio journalist on a national radio program in the UK, listed the reasons he deletes press release emails in a LinkedIn post on October 10, 2025. Most of his reasons, he wrote, come down to one test: "is there any clue that this email was sent to anyone other than me and only me?" He adds his own caveat: an online news desk hungry for content may think differently, and the industry is not one-size-fits-all.

What to put in the email

The email is a specific subject line, a few sentences on what the news is and why the outlet's readers would care, the release pasted below, and a name and phone number.

Illustration of a woman typing an email on a laptop, with the pasted press release shown as a gold block

The parts, in the order the journalist meets them:

  1. A subject line that says what the news is, in plain words.
  2. A greeting that uses the journalist's name.
  3. Two or three sentences on the news and why it matters to this outlet's readers.
  4. The press release pasted in full.
  5. A contact name, phone number and email address.
  6. Photos attached or linked, as the newsroom's page asks.

The subject line can decide whether the email is opened. The Portland Press Herald tells senders: "Our reporters often get hundreds of emails each day, so be sure your subject line is clear." The same page warns: "If your subject line looks like spam or something without a tie to Maine, there’s a chance your message may be deleted before it’s ever opened." A subject line that names the place and the news passes both tests. Tim Johns lists a subject line in capital letters among his reasons to delete a press release email.

The note above the release stays short. In Muck Rack's 2026 survey, 69% of journalists prefer pitches under 200 words. Two or three sentences cannot tell the whole story, and they do not have to: the release below them carries the details. The note's job is to say what happened and why this outlet's readers would care.

The release itself goes in the body of the email, not in an attachment. The Portland Press Herald's instruction is plain: "We prefer that you copy and paste your message into the body of your email." The same page asks senders not to send news as a Word document or PDF. Other newsrooms set different rules: Pascack Press in New Jersey accepts Word or plain text but not PDF, and the Rio Grande Valley Business Journal in Texas takes an uploaded file through its form. Where pages differ, the newsroom's own page wins.

Where a page says nothing about format, pasting is the safe default. Alyssa Rotunno, a journalist who receives pitches herself and also advises brands on PR, wrote in her newsletter Digital Doorstep on June 1, 2026: "More often than not, the emails sitting in spam have something attached." That is her own experience of her own inbox, not a rule about every filter. The point for a sender: do not leave the facts that matter inside an attachment.

The release answers four questions early. The Portland Press Herald asks for the who, what, when and where of the event or accomplishment.

The contact details include a phone number. The Portland Press Herald asks for a cellphone or other phone number where the sender can be reached during the day, and gives its reason: its reporters work on tight deadlines and may have only a few hours to reach the sender between being given a story and filing it. KTLA 5 in Los Angeles asks for a name, phone number, city and state. Tim Johns lists having no phone number to reach the sender on among his reasons to delete.

Links stay few and plain. Tim Johns lists an email full of hyperlinks, and links with tracking, among his reasons to delete. The release itself carries the links that matter.

Photos go as attachments where a newsroom asks for them. The Portland Press Herald asks senders to attach high-resolution photos without waiting to be asked. The Vail Daily asks for photos attached as .jpeg files, nothing smaller than 1 inch and preferably around 10.

When to send a press release

The morning, before noon in the journalist's time zone, is when most journalists say they prefer pitches, unless the newsroom prints a deadline of its own.

Illustration of a woman at a laptop in the morning with a gold desk clock beside her

Both editions of Muck Rack's State of Journalism survey report the same figure: 78% of journalists prefer pitches before noon. The 2025 edition was an online survey of 1,515 journalists from the United States, Canada and India. It ran in April 2025 and was summarized on the Institute for Public Relations' site on August 16, 2025. The 2026 figure was read on the University of Minnesota's summary.

The day of the week matters less than senders tend to think. In Muck Rack's 2026 survey, half of journalists do not care what day of the week they are pitched, and 18% prefer pitches on a Monday. No survey read for this article gives a best day or hour that holds for every journalist.

A newsroom that prints a deadline wins over any pattern. Pascack Press, a weekly paper in New Jersey, prints one: noon on Wednesday for its weekend edition, and earlier is better. It is the only deadline for sending news on any of the seven newsroom pages read for this article.

An event changes the timing. The Portland Press Herald asks senders to send event information at least two weeks in advance to be included in calendar listings, and three weeks if possible, because events go into its calendar first come, first served. The paper adds that event listings can be entered by the sender in its online calendar. Pascack Press asks for a brief pitch at least two weeks before the event, with the date, time, location and spokesperson details.

One term a first-time sender may meet: an embargo is an agreement that a journalist receives news early and holds it until a set time. An embargo is optional, and it binds only a journalist who agreed to it.

How to follow up on a press release

Follow up once, by email, a few days after sending, and then stop.

One follow-up is the most that journalists say they accept. In Cision's 2026 survey, about two-thirds of journalists say one follow-up is enough, and 8% want more than that. In the report's chart for the same question, 28% answered that a PR person should never follow up at all. In Muck Rack's 2025 survey, 50% of journalists said one follow-up is ideal, and 51% said they want that follow-up within 3 to 7 days. The surveys together set the ceiling at one.

Silence is common, and it isn't a verdict on the news. In Cision's 2026 survey, the majority of journalists sort through more than 50 pitches a week. In Muck Rack's 2025 survey, 55% received more than five pitches a day, and 17% received 11 to 20. The Portland Press Herald warns that its reporters often receive hundreds of emails a day. In that kind of volume, an unopened email and a rejected one look exactly the same from the sender's side. No reply either way, and no way to find out which one yours was. That's why we don't read silence as feedback on the release. A clear, relevant email can still go unread, and one reminder is a fair send. If the reminder gets no answer either, put the effort into a sharper list next time.

A useful follow-up adds something the first email did not have: a photo, a figure, or a person available to talk. Our advice at Press Moose is to keep it to a sentence or two, sent as a reply to the first email so the release travels with it, and then to stop.

What newsrooms ask for when you submit a press release

Newsrooms that publish submission instructions ask for much the same things: one address or form, the basic facts, and a way to reach the sender.

Illustration of an editor at a desk reading an inbox on a monitor, with the top rows in gold

This table lists what each of seven newsrooms' own pages asks for; Press Moose read all seven pages on November 13, 2026.

NewsroomHow to send itWhat its page asks for
The Associated PressEmail, to the address on its media center pageNothing further; the page names no desk
Portland Press Herald, MaineEmail, with the text pasted into the bodyA clear subject line; who, what, when and where; a daytime phone number; no Word document or PDF
KTLA 5, Los AngelesA form on its site, or emailName, phone number, city and state
Spokane Journal of Business, WashingtonEmail to its editor; fax and mail also listedNothing further on the page
Vail Daily, ColoradoEmail to the editor named for news or for artsNo more than 500 words; photos attached as .jpeg
Rio Grande Valley Business Journal, TexasA form on its siteUnder 700 words; high-resolution images; contact information
Pascack Press, New JerseyEmail, as Word or plain textA headline, a summary, contact details and photos; no PDF

Several of these pages carry no date, and newsrooms change their instructions, so the newsroom's own page is worth checking before anything is sent.

Across the seven pages, the common ground is wide. Every one names an address or a form for news. Five of the six local newsrooms ask for contact details or a phone number, or they name the editor to write to. The sixth, the Spokane Journal of Business, asks for nothing further. Four set a length or format rule for the text: the Portland Press Herald wants the text pasted into the email, the Vail Daily sets a 500-word limit, the Rio Grande Valley Business Journal sets 700 words, and Pascack Press refuses PDFs. KTLA 5's page speaks of tips and story ideas and gives no separate route for press releases.

The seven newsrooms in the table disagree on one practical point: pasting against attaching. The Portland Press Herald wants the text pasted into the email and no Word document or PDF. Pascack Press accepts Word or plain text but not PDF. The Rio Grande Valley Business Journal takes an uploaded file through its form. Photos are wanted as attachments by the Portland Press Herald, the Vail Daily and the Rio Grande Valley Business Journal. The safe default for a newsroom with no published instruction: paste the text into the email, attach only photos, and follow the newsroom's own page where it says otherwise.

The Associated Press is the one national name on the list, and the AP's media center page gives one instruction for press releases: "Press releases should be emailed to [email protected]." For press releases, the page names that one address and no desk or editor. The AP's separate news tips page is for confidential tips and does not mention press releases. None of the pages read for this article says the AP will publish or use a release sent to that address, or which desk reads it.

Two of the seven newsrooms say in writing that publication is not guaranteed. The Vail Daily tells senders: "Although we aim to publish all submissions, we cannot guarantee publication or specific publication date." Pascack Press states: "Note: The only way we can guarantee placement is through paid advertising."

Free press release submission sites

A free press release submission site posts the release on its own pages at no charge.

The sender pastes the release into a form on the site, and the site publishes it on its own pages. What comes back is a page on that site. PRLog says on its about page that most of its services and features are free. IssueWire's price page offers a free release with limited distribution beside its paid tiers. A page on a submission site is a placement, not coverage: the release appears as written, and no journalist has chosen to write a story about it.

Sending a press release through a paid newswire service

A paid wire or distribution service takes the finished release, publishes it on its own site and on partner news sites, and sends back a report of where it appeared. We'd treat that as buying a record. The same words go up under your name, dated, on pages you can send people to later.

This paid route is what searchers usually mean by press release distribution. The Press Moose homepage covers the service itself, and this page stays with how the sending works.

The field splits into two groups. Traditional newswires include PR Newswire, Business Wire and GlobeNewswire. Online distribution services with a flat price per release include EIN Presswire, PRWeb, 24-7 Press Release Newswire and eReleases. Cision owns PR Newswire and PRWeb. The names matter less than the pages that show up afterward.

The sender's part is short. Open an account, upload the finished release, pick where it goes and a date, and pay. The service's editors usually check the release before it goes out. That check is common, and it isn't universal. We like that check when it's there. It won't fix a weak announcement. It can catch a release that shouldn't be paid for yet.

A first send can be held up, so the timeline is worth allowing for. PR Newswire's how-to page says organization details are necessary for it to verify the sender as an authorized sender. EIN Presswire tells new customers to expect a one-time account verification check that can take up to two business days. After that check, it says a review takes about two hours. Open the account before the week you need it.

PRWeb says its Standard Package distribution level requires a two-day turnaround for approval. eReleases says it processes most orders on a next work day basis. A first-time sender shouldn't count on same-day sending. If the news has a date tied to it, work backward from the slowest part, the account check.

Releases get sent back for predictable reasons. EIN Presswire's editorial guidelines say a document whose primary purpose is to sell, with no other newsworthy element, will be denied publication. EIN Presswire and PRWeb both print a link limit of 1 per 100 words. PRWeb says its press releases should be between 300 and 800 words. Paying doesn't soften that. A release built around a price or a slogan can get stopped before it reaches any partner site.

Prices sit far apart. Each price comes from the vendor's own page or guide, read on November 12, 2026. 24-7 Press Release Newswire starts at $49 with distribution. EIN Presswire charges $149 for one release of up to 700 words. Business Wire starts at $475 for 400 words on a U.S. local circuit, the area a release is sent to. PR Newswire's 2026 Pricing Guide lists $1,145 for a national release of 400 words, before its annual plan fee. That gap is why we ask what the fee buys before we compare anything else.

What comes back is a report listing the pages where the release was posted, with counts. The report lists copies of the release. It doesn't list stories by journalists. On coverage, the services' own pages say they can't promise that the media will use a release. PRWeb's FAQ states, "no newswire service can guarantee that the media will use your news release." A publicly traded company with disclosure duties should ask a newswire about regulatory filing before choosing a route. For everyone else, ask for a sample report and open the pages. A count you can't click through isn't worth much.

To see what a paid send produces, Press Moose followed four real releases across the web on November 13, 2026. We picked one ordinary announcement from each of four distributors' own sites, issued between September 3 and October 14, 2026, searched the web for each exact headline, opened the pages the search returned, and recorded what each page showed. We wanted ordinary releases because that's what most owners send.

We found 100 copies across the four releases. The count was 9 for a release sent through PR Newswire, 21 through GlobeNewswire, 13 through EIN Presswire and 57 through 24-7 Press Release. We could read 29 of the pages. Another 23 refused our request. The pages were news feeds and markets pages, trade and business news sites, the press release sections of news sites, finance portals, and pages under local newspapers' domain names. On most pages, the text matched the original word for word. That pattern is what the fee buys. A paid send is good at putting the same release in many places.

Of the 29 pages we could read, 16 carried a line saying the site didn't write the text or isn't responsible for it, or marking it as third-party or paid. The most common line, on 11 pages, "This article is third-party content and does not represent the views of this site. We make no guarantees regarding its accuracy or completeness." We don't see that label as a failure. It's the site being clear about who wrote the words.

Keep the limits with the counts. A search finds only what it has indexed, so each count is a floor. Four releases are examples, and they don't stand in for the industry. We make no claim about how any release performed, and the counts don't rank the four services. What the trace shows a first-time sender is what a paid send produces. Copies of the release on news sites, 16 of the 29 we could read marked as third-party content or as not written by the site. That's what a placement is. The release itself on news sites, as written, with a list of where it appeared. If that's the thing you need, the route makes sense. If you need a reporter to choose the story, send the email too.

Having a service write and send the press release for you

Some services write the press release as well as publish it, so the sender supplies a brief instead of a finished release.

The difference from a paid wire is where the writing happens. With a wire, the sender uploads a finished release. With this route, the sender fills in a brief: what the news is, who is involved, and what the release should link to. The service writes the release, the sender approves the final text, and the service publishes it.

Press Moose is one of these services. We write and publish press releases for a fee, so this part of the page describes what we sell. An order runs like this: we write the release from the client's brief, up to 800 words with 3 links to the client's site; the client approves the final text before anything is published, with unlimited edits before approval; and the release is published as a dated page on each participating news site in the package's network. A client who already has a draft can send it with the brief, and our editors edit it for the same price. The how it works page shows how an order with Press Moose runs from brief to report.

The timing, and what the sender must have ready: a draft is ready within 2 business days of the brief, and the release is live within 3 to 5 business days of approval. The client's website and the pages the release links to must be live before a release can run.

There are three packages, one payment per release and no monthly fee: Launch at $149 reaches 300+ news sites, Amplify at $299 reaches 450+ sites, and Headline at $649 reaches 500+ sites. The pricing page lists the three packages and what each one adds.

What comes back is a live placement report listing every URL, refreshed hourly. The examples page shows a sample release written for a fictional brand and a sample report.

Each site count is a minimum, backed by a full refund if the report lists fewer live placements than the package minimum 14 days after the release first goes live. Every outlet decides what it runs. Publication is not a publisher's editorial endorsement, and it does not guarantee rankings or mentions in AI answers.

Which way to send a press release fits your news

The right way to send a press release depends on what the sender wants to happen next: a story written by a journalist, or the announcement itself on the record.

Local news with a local angle goes to the local newsroom by email. A new shop, a school result, a charity event: the news affects that outlet's readers, the newsroom publishes where to send it, and the email costs nothing.

A story for one trade or subject goes to the few journalists on that beat. The bylines on recent stories about the subject name them, and a short list written one by one is the method the surveys support.

A sender who wants a public page to point people to, at no cost, is describing a free submission site. What comes back is a placement, not coverage: the release appears on the site as written, and no journalist has chosen to write a story.

A sender who wants the announcement published as written on news sites, with a list of the pages it appeared on, is describing a paid wire or distribution service.

A sender with no release written yet is describing a service that writes it and publishes it.

The email route costs nothing, so the choice is not either-or. A sender can pay for publication and still email the handful of journalists who might choose to write the story.

Questions

From this guide

Can I send a press release myself for free?

Emailing a press release to journalists and newsrooms yourself costs nothing. Email is the channel journalists themselves name: in Cision's 2026 State of the Media survey, 97% prefer to be pitched by email. The sender chooses who receives it, and the journalist decides whether anything is published.

Should a press release be attached or pasted into the email?

The release pasted into the email is the safe default. The Portland Press Herald asks for the text pasted into the body of the email and not sent as a Word document or PDF; Pascack Press accepts Word or plain text but not PDF, so where pages differ, the newsroom's own page decides. Photos go as attachments. Alyssa Rotunno, a journalist who receives pitches herself and also advises brands on PR, finds that, more often than not, the emails sitting in her spam folder have something attached.

How do I send a press release to the Associated Press?

The Associated Press publishes one address for press releases: [email protected]. Its media center page names no desk or editor for press releases, and its separate news tips page is for confidential tips and does not mention releases. Nothing Press Moose read says the AP will publish or use a release sent to that address.

How many journalists should I send a press release to?

A sender should write to as many journalists as the news is relevant to, each written to one by one. No source read for this article gives a right number. In Cision's 2026 survey, 82% of journalists reject pitches that do not fit what they cover, and in Muck Rack's 2026 survey, 62% prefer to be pitched in an email written to one journalist. Relevance sets the size of the list.

How long should I wait before following up on a press release?

A follow-up to a pitch should go out a few days after sending. In Muck Rack's 2025 survey, 51% of journalists want a follow-up to a pitch within 3 to 7 days, and 50% say one follow-up is ideal. In Cision's 2026 survey, about two-thirds of journalists say one follow-up is enough. Send one, then stop.

Press Moose Team

The Press Moose writing desk. We write it, you approve it.

Done reading

Put the guides to work

Your draft lands within 2 business days of your brief. Your coverage follows after approval.